How to measure for curtains?

Easier Measuring, Better Customizing

Measuring can be even easier at Texture. Try our Measurement Tool, or just follow our ready-to-use measuring steps. Now, take a look at the simple steps!

Step 1: Measure Your Window

Install the rod or track at a suitable height, we recommend that the rod be as close to the ceiling as possible. And it should extend at both ends about 6-15 inches from the window frame to keep light out and allow space for the curtains to open.

Step 2: Determine the Curtain Width

For Grommet Top/ Rod Pocket

Width of per panel = Rod/track width / Number of panel x Fullness.

For Pinch Pleat – Double/ Triple

Width of per panel = Rod/track width / Number of panel.

If there is no rod or track, then: Rod/track width = Window width + 6" to 15" on each side.

Step 3: Determine the Curtain Length

For Grommet Top/ Rod Pocket

Length of per panel = 1.2in + Top of the rod to where you want the curtain to finish + Bottom.

For Pinch Pleat – Double/ Triple

Length of per panel = Where you’d like the curtain top to be to floor distance + Bottom.

 

Something needs to be considered when calculating the final size of per panel.

What will happen if the size is over the max limit?

Most of our designs are solid and cross-pattern fabric. The width of most fabric rolls is 104 inches.

We can make curtains without seams if your curtain length is below 104 inches. The fabric roll width is curtain length.

However, the vertical stripes/patterns will become horizontal stripes/patterns if the curtain length is over 104 inches.

The fabric roll width is curtain width(the width should be smaller than 104 inches).

If both the width and length are over 104 inches, curtains will come with seams to meet the size.

Panel Type

You may order your drapery as Single Panel or in a Pair(Split Panel).

Split Panel - 1 Left 1 Right:

Two equal panels (1 left, 1 right), the total width coverage you specify will be automatically divided in 2.

Single Left Panel:

One individual panel of fabric is open to the left. Made to cover an entire span or as a decorative stationary panel.

Single Right Panel:

One individual panel of fabric is open to the right. Made to cover an entire span or as a decorative stationary panel.

Bottom

Bottom (Puddling) refers to an extra drapery length spilled or "puddled" onto the floor.

We only recommend puddling for decorative drapes. If your drapes are going to be opened and closed regularly puddling is not recommended as the bottom of the draperies will get dirty very quickly.

Reduce 1/2": 1/2" above the floor, avoid drapes touching the floor. If you would like to have straight curtains,this is the best option.

No Puddle: Just slightly reach to the floor. It is hard to make right but it creates a custom-made classic and tailored look.

1" Puddle: Also called a break or "trouser" break. 1" puddling provides a clean look where the draperies just rest on the floor.

2"-4" Puddle: The most popular puddle today. The drapes have adequate length to spill nicely onto the floor but still not a large puddle.

6"-8" Puddle: A true puddle. There is enough extra length to fan the draperies out onto the floor.

Fullness

Curtains can be flat or they can have fullness. Fullness is the amount of fabric that is used to cover the width of your curtain track or pole. Fullness provides a drape with a richer look and more light and sound absorption.

 

2.5X fullness: 2.5X fullness has a luxury look for a rich pleat-looking.

2.0X fullness: For a nice pleat-looking and proper use, 2X fullness is highly recommended.

1.8X fullness: 1.8X fullness may have a flat look for a large window. This is the minimum fullness required for the pinch pleated header.

1.5X fullness: For a large window, 1.5X fullness may have a flat look.If you're hanging curtains just to frame a window and don't intend to shut them, you can choose 1.5X fullness.

Fullness is the amount of fabric covering the area. For example:

Use a 42-inch wide panel to cover the 42-inch area, which is 1X fullness, and the curtains are flat, not wave/pleat looking.

Use an 84-inch wide panel to cover the 42-inch area, which is 2X fullness, and the curtains will have a beautiful wave/pleat appearance.

For the top of the grommet, we recommend using 2Xfullness and at least using 1.5Xfullness, because the grommet will make the coverage area narrower than the curtain width.

Stack Back

Stack back is the space the curtains occupy when fully open.

For ONE PANEL: With a panel width of 1 Inches in Grommet or Rod Pocket style, the stack back is roughly 0.13 inches.

Please note that the calculation of the stack back width is only an estimate. Stack back can fluctuate depending on factors such as puddling, fabrics, lining options, curtain rods, brackets, and rings.